WoLF Countertop Model


The WoLF Countertop Model is our standard WoLF Water structuring device.

With a little creativity, our WoLF Countertop Model can be installed into virtually any countertop, shelf or cabinetry environment. All that is needed is a water source to the inlet, a small waste water drain, a power outlet close by, and room below the WoLF for either a tank or jug installation, or outlet tubes to a sink. The system is a gravity feed design. So all basins must be below the WoLF.
The WoLF Countertop Model comes with a basic carbon filter installed.
See the Infinite Uses and Applications for the Quantum WoLF water structuring device.



WoLF Countertop Model – General Specifications

  • Dimensions – Wolf Case – 24.5″ W x 24.5″ H x 8.5″ D      Weight – ~ 42 lbs.
  • Electrical Requirements – 12VDC @ 1500mA – supplied by ANALOG Transformer
  • Transformer – MUST BE an ANOLOG or NON – “digital circuitry” type Transformer –
    Input Requirements – 120VAC, 60Hz, 50W
  • 2 Vortex Tubes – CW & CCW spins. – Golden Mean Ratio Dimensions
  • Advance Modified Tesla Coil – pulsed DC voltage output – ~90,000v – Frequency dependent.
  • Water System – SELF CLEANING – Attribute of Water Structuring Process.
  • No Moving Parts.
  • Required minimum water input pressure – 18 lbs.
  • Structured Water Output volume for Home Model – 1.5 gallons/minute
  • Waste water volume – minimal
  • 3 Carrier Frequencies – injected into Water System – Cosmic Pitch Notes of D, G, B.
  • All frequencies – based on Planet Earth’s Schumann Nominal Pulse of 7.83 cycles/sec.


Back to Store


There are no reviews yet.

Be the first to review “WoLF Countertop Model”

Your email address will not be published. Required fields are marked *